Description

The Wav Av Cover Frame,12 X 12 Sq, White, Ansi Ok (wav12101) has been recalled by the manufacturer, please refer toAquaStar 16″ Square Retrofit VGB Pool Drain Cover – 1216101or theAquaStar 12″ Wave Suction Outlet Cover – WAV12WR101as other options for replacement.

INYO # 3816-311 AQUASTAR # WAV12101 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT FRAME AND COVER

************************************************

GENERAL DESCRIPTION: 12″ X 12″ SQUARE FRAME AND COVER, WHITE

************************************************

BASIC SPECS: SCREW HOLES: 1 IN THE CENTER OF EACH SIDE USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 361 GPM @ 1.3 FPS WALL: 361 GPM @ 1.3 FPS LIFE: 5 YEARS TOTAL OPENING: 85.2 SQ INCH 400 GPM @ 1.5 FPS

************************************************

THIS IS A 12″ X 12″ SQUARE COVER AND FRAME WITH SCREWS THIS HAS A REGULAR GRATED SHAPE BUT THE COVER SLOPES SLIGHTLY UPWARD FROM THE OUTSIDE TOWARD THE CENTER. THERE ARE A LARGE NUMBER OF SEMI-CIRCULAR EXTENSIONS RUNNING IN ONE DIRECTION ON TOP OF EACH GRATE. THIS HAS A ROUND CENTERPIECE WHICH CONTAINS THE VARIOUS LABELS REQUIRED BY THE VGB LAW EACH SIDE OF THE COVER HAS A SQUARE NOTCH AT THE BOTTOM IN THE CENTER OF EACH SIDE. THE FRAME HAS MATCHING SQUARE TABS WHICH CONTAIN THE SCREW HOLES. MATERIAL: PLASTIC COVER AND FRAME, STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: SQUARE

************************************************

FRAME COVER DIMENSIONS: TOTAL HEIGHT: 1-31/32″ FRAME ONLY HEIGHT: 29/32″ FRAME LENGTH WIDTH AT PLASTER LINE: 12-5/16″ (A) FRAME MAXIMUM LENGTH WIDTH AT BOTTOM: 13-7/32″

************************************************

COVER DIMENSIONS: COVER OUTSIDE LENGTH WIDTH: 11-7/8″ COVER ONLY HEIGHT: 1-13/16″ COVER EXTENDS 1-1/8″ MAXIMUM ABOVE THE FRAME WHEN INSTALLED THE COVER IS 3/4″ TALL AT THE EDGE. SPECIAL NOTE: THE WAV 12 X 12″ COVER IS IN THIS FRAME AND COVER. THE RWAV 12 X 12 RETROFIT COVER IS TALLER AND HAS EXTRA HOLES. THE RWAV IS SOLD AS A REPLACEMENT COVER ONLY.

************************************************

SCREW HOLES: TOTAL SCREW HOLES: 4 THERE IS A SCREW HOLE IN THE CENTER OF EACH SIDE THE CENTER OF THE SCREW HOLE IS 5/16″ FROM THE EDGE FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 11-1/4″. THERE IS A 3/8″ TALL X 5/8″ LONG NOTCH JUST BELOW THE SCREW HOLE IN EACH SIDE. THIS NOTCH MATCHES THE CORRESPONDING TAB ON THE FRAME

************************************************

SCREWS: 4 SCREWS – #10 X 3/4″ LONG SS, SELF TAPPING PHILLIPS HEAD THESE ATTACH THE COVER TO THE FRAME

************************************************

MARKINGS: WAV12-XXX IS MOLDED INTO THE TOP OF THE COVER IN THE CIRCULAR CENTER PIECE THE FRAME HAS NO MARKINGS THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON THE COVER