Description
The original heater may have used a redundant hi-limit, if that is the case when replacing with this heater simply protect the wire connections from the original hi-limit and do not use. The heating element on this assembly is not replaceable.
| Heater Application | Leisure Bay |
| Heater Length | 15″ |
| Heater Type | Flo Thru |
| Housing Configuration | Straight |
| Housing Diameter | 3″ |
| Kilowatts | 1.0kW/4.0kW |
| Pressure Tap Orientation | 0 Deg from Terminals |
| Voltage | 115v/230v |
| Heater Inlet Size | 2″ |
| Heater Inlet Type | Slip (s) |
| Heater Outlet Size | 2″ |
| Heater Outlet Type | Slip (s) |
THERM PRODUCTS #F2400-1001 BALBOA # 58042 THIS IS A FLOW THRU HEAT EXCHANGER TYPE HEATER. 4 KW, 240 VOLT THE TUBE IS 3″ OUTSIDE DIAMETER AND 17-1/2″ FROM END FLANGE TO END FLANGE THE END TAILPIECES ARE INCLUDED AND ARE 2″ SLIP THE ELEMENT ON THIS UNIT IS ON THE OUTSIDE OF THE TUBE AT THE TOP AND ENCLOSED BY AN ALUMINUM BOX WHICH IS INCLUDED. THE OUTSIDE ELEMENT MAKES THIS A HEAT EXCHANGER TYPE HEATER THE ELEMENT LEADS HAVE LONG WIRES ATTACHED WHICH EXTEND THROUGH THE HOUSING THERE IS A 1/8″ FEMALE TAPPED HOLE ON THE CENTER OF THE BACK OF THE HEATER TUBE JUST AT THE LEFT SIDE OF THE BOX.
Reviews
There are no reviews yet.