Description

INYO # 4890-066 ANTHONY # 39960328 ANTHONY # 004908 (OLDER ANTHONY NUMBER) GENERAL DESCRIPTION: THIS IS THE COMPLETE MAIN SHAFT WITH SPACERS, TOP PLATE, AND HANDLE IN THE ANTHONY 2″ PUSH PULL VALVE THE HANDLE IS A T-STYLE, BLACK PLASTIC, HELD ON WITH A SINGLE SET SCREW GENERAL INFO MATERIAL: SHAFT: BRASS SPACERS: BRASS TOP CAP: BRASS (INCLUDED WITH THIS ASSEMBLY) HANDLE: BLACK PLASTIC (INCLUDED WITH THIS ASSEMBLY) DIMENSIONS: LENGTH: 17-1/4″ (INCLUDING HANDLE) LENGTH: 16-1/2″ (A) (WITHOUT HANDLE) SHAFT DIAMETER: 1/2″ (B) SPACERS: TOTAL # 2 SPACERS INCLUDED 3RD SPACER IS INCLUDED,AS PART OF THE TOP PLATE DIAMETER: 2-1/8″ THICKNESS: 1/4″ FROM OUTSIDE TO OUTSIDE GROOVE: 1/8″ SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 9″ 3RD 14-3/8″ SPACER O-RINGS: (3) INCLUDED THESE ARE STRETCHED ON TO THE SPACERS SO THE DIMENSIONS SHOWN ARE FOR THE ORIGINAL O-RINGS BEFORE THEY ARE STRETCHED OUTSIDE DIAMETER: 1-7/8″ INSIDE DIAMETER: 1-5/8″ HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 3/32″ AT 1-1/2″ FROM END HOLE: 3/32″ AT 4-5/8″ FROM END ASSEMBLY INCLUDES: SHAFT WITH 2 SPACERS TOP CAP WITH SPACER O-RING FOR EACH SPACER (3 TOTAL) SHAFT O-RING SPRING PINS (2 TOTAL) HANDLE HANDLE SET SCREW MARKINGS: THERE MAY BE MARKINGS ON THE HANDLE OR TOP CAP, SEE BELOW

*******************************************************************************

TOP PLATE INFO INCLUDED? INCLUDED INYO # 4890-065 ANTHONY # 39960326 ANTHONY # 017753 (OLDER ANTHONY NUMBER) GENERAL DESCRIPTION: THIS IS THE TOP PLATE IN THE ANTHONY 2″ PUSH PULL VALVE MATERIAL: BRASS SHAPE: TRIANGLE WITH ROUNDED POINTS THERE IS A 5/16″ AT EACH POINT THE HOLE CENTERLINE IS ABOUT 5/16″ FROM THE EDGE THIS TOP PLATE ALSO INCLUDES THE TOP SPACER CAST AS PART OF THE PLATE DIMENSIONS: WIDTH(CENTER TO POINT): 3″ (A) TOTAL HEIGHT: 11/16″ (B) CENTER HOLE DIAMETER: 1/2″ INCLUDES: TOP PLATE WITH SPACER ONLY MARKINGS: “OPEN” AND “LOCK” WITH ARROWS CAST ON TOP

*******************************************************************************

HANDLE INFO INCLUDED? INCLUDED INYO # 4890-048 ANTHONY # 21300913 ANTHONY # 017604 (OLDER ANTHONY NUMBER) GENERAL DESCRIPTION: THIS IS THE HANDLE IN THE ANTHONY 1-1/2″ AND 2″ PUSH PULL VALVE MATERIAL: ORIGINAL WAS CHROME PLATED BRASS THIS HANDLE IS BLACK PLASTIC SHAPE: T STYLE, WITH SET SCREW HOLE IN THE SIDE DIMENSIONS: LENGTH: 4-1/2″ (A) WIDTH: 1″ HEIGHT: 1-3/8″ (B) INCLUDES: HANDLE ONLY MARKINGS: “ANTHONY” OR “VAL PAK” MOLDED ON THE TOP

*******************************************************************************