Description

ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad thermostat with a new oneCapillary Length: 6″Bulb Thickness: 1/4″

Thermostat, Invensys, 1/4″, 6″, SPST, 25A, Short Leads is Discontinued:

Alternate:Thermostat, 12″ Cap 1/4″ Bulb (275-3123-00)